Welding · LPG cylinder production line
Both sides of the circumferential seam arc at the same time, balancing heat input so ovality change stays small and no re-rounding pass is needed.
The torch follows the joint in real time, so fit-up variation in incoming parts does not turn into weld deviation.
Each cylinder type and plate thickness has a stored program; a size change is a recipe call, not a manual setup.
Standard machine data below. Non-standard sizes can be tooled to your cylinder drawings.
| Air pressure | 0.6 MPa |
|---|---|
| Welding speed | 0.2–1.36 m/min (stepless) |
| Open-circuit voltage | 70 V |
| Welding voltage | 24–40 V |
| Welding current | 100–500 A |
| Rated input current | 70 A |
| Input power | 38 KVA |
| Duty cycle | 500 A/60%, 400 A/100% |
| Welding voltage stability | ±1.5 V |
| Welding current stability | ±15 V |
| Control circuit voltage | 36 V |
| Power supply | AC 380 V / 50 Hz, 3-phase + N + PE (customized to destination) |
| Protection | Control cabinet IP54, actuators IP65 |
| Lead time | 60 – 90 days after contract effectiveness |
The more specific your information, the more accurate the quote. Ideally include: cylinder size (1 / 5 / 12.5 / 15 / 25 / 50 kg), sheet thickness, target daily output, existing process and available floor area.
