Forming · LPG cylinder production line
Decoiling, levelling and feeding run in a closed servo loop, holding blank length within ±0.2 mm without manual correction before drawing.
End-dish dies for 1 kg to 50 kg cylinders change in about 30 minutes, so a single line covers the full product range.
Offcuts are collected on a conveyor instead of accumulating beside the machine, keeping the aisle and the operator station clear.
Standard machine data below. Non-standard sizes can be tooled to your cylinder drawings.
| Nominal force | 3000 KN |
|---|---|
| Drawing force | 2000 KN |
| Blank-holder force | 250×4 KN |
| Max. hydraulic pressure | 25 MPa |
| Drawing slide stroke | 700 mm |
| Blank-holder slide stroke | 400 mm |
| Drawing slide daylight | 1400 mm |
| Blank-holder slide daylight | 900 mm |
| Motor power | 44 kW |
| Main frame weight | 12000 kg |
| Total weight | 13500 kg |
| Power supply | AC 380 V / 50 Hz, 3-phase + N + PE (customized to destination) |
| Protection | Control cabinet IP54, actuators IP65 |
| Lead time | 60 – 90 days after contract effectiveness |
The more specific your information, the more accurate the quote. Ideally include: cylinder size (1 / 5 / 12.5 / 15 / 25 / 50 kg), sheet thickness, target daily output, existing process and available floor area.
